Manufactur standardVacuum Carburizing Heat Treatment Process- Low temperature vacuum brazing furance – Paijin
Manufactur standardVacuum Carburizing Heat Treatment Process- Low temperature vacuum brazing furance – Paijin Detail:
Application
It is mainly used for vacuum brazing and heat treatment of aluminum alloy products such as automobile radiator, air conditioning evaporator, condenser, radar network antenna and so on.
Characteristics
★Square chamber design, reflective metal heat shield, 360 degree surround radiation heating
★ Multi-zones independent temperature control, convective heating , vacuum partial pressure
★ Internal and external circulating cooling mode
★ Add vacuum condensation and Collector at exhaust Port
★ Fast recovery time of High vacuum system
★ Accurate process control achieves consistent product reproducibility
Standard model specification and parameters
| Model | PJ-LQ5510 | PJ-LQ9920 | PJ-LQ1225 | PJ-LQ1530 | PJ-LQ2250 |
| Effective Hot Zone WHL (mm) | 500*500* 1000 | 900*900* 2000 | 1200*1200* 2500 | 1500*1500* 3000 | 2000*2000* 5000 |
| Load Weight（kg） | 500 | 1200 | 2000 | 3500 | 4800 |
| Maximum Temperature（℃） | 700 | ||||
| Temperature control accuracy(℃) | ±1 | ||||
| Furnace temperature uniformity(℃) | ±3 | ||||
| Maximum Vacuum Degree(Pa) | 6.7 * E -3 | ||||
| Pressure raise rate （Pa/H） | ≤ 0.5 | ||||
| Air cooling pressure | 2 | ||||
| Furnace structure | Horizontal, single chamber | ||||
| Furnace door opening method | Hinge type | ||||
| Heating elements | Ni Strip heating element | ||||
| Heating chamber | Metal Insulation screen | ||||
| PLC & Electric elements | Siemens | ||||
| Temperature controller | EUROTHERM | ||||
| Vacuum pump | Mechanical pump， roots pump，diffusion pump | ||||
| Customized optional ranges | |||||
| Furnace structure | Horizontal,Vertical, single chamber or multi chambers | ||||
| Door opening method | Hinge type, Lifting type,Flat type | ||||
| Heating elements | Ni Strip heating element， Mo heating elements | ||||
| PLC & Electric elements | Siemens;Omron;Mitsubishi;Siemens | ||||
| Temperature controller | EUROTHERM;SHIMADEN | ||||
Product detail pictures:
Related Product Guide:
It adheres for the tenet "Honest, industrious, enterprising, innovative" to develop new products and solutions continuously. It regards shoppers, success as its individual success. Let us produce prosperous future hand in hand for Manufactur standardVacuum Carburizing Heat Treatment Process- Low temperature vacuum brazing furance – Paijin , The product will supply to all over the world, such as: Georgia, USA, Colombia, Many goods fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't have to waste time shopping around.
By Karen from Cologne - 2018.09.29 17:23
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Agatha from Iraq - 2018.07.27 12:26
Write your message here and send it to us
-
Personlized Products Metal Heating Process- Hi...
-
Factory makingWhich Is A Good Tempering Furnace...
-
Original FactoryModern Furnace- High temperatu...
-
Well-designedHeat Treatment Equipment Manufactu...
-
High reputationHeat Hardening- Low temperature...
-
Low price forTreating Metal- High temperature ...