Short Lead Time forHeat Treatment Cost- Low temperature vacuum brazing furance – Paijin
Short Lead Time forHeat Treatment Cost- Low temperature vacuum brazing furance – Paijin Detail:
Application
It is mainly used for vacuum brazing and heat treatment of aluminum alloy products such as automobile radiator, air conditioning evaporator, condenser, radar network antenna and so on.
Characteristics
★Square chamber design, reflective metal heat shield, 360 degree surround radiation heating
★ Multi-zones independent temperature control, convective heating , vacuum partial pressure
★ Internal and external circulating cooling mode
★ Add vacuum condensation and Collector at exhaust Port
★ Fast recovery time of High vacuum system
★ Accurate process control achieves consistent product reproducibility
Standard model specification and parameters
| Model | PJ-LQ5510 | PJ-LQ9920 | PJ-LQ1225 | PJ-LQ1530 | PJ-LQ2250 |
| Effective Hot Zone WHL (mm) | 500*500* 1000 | 900*900* 2000 | 1200*1200* 2500 | 1500*1500* 3000 | 2000*2000* 5000 |
| Load Weight（kg） | 500 | 1200 | 2000 | 3500 | 4800 |
| Maximum Temperature（℃） | 700 | ||||
| Temperature control accuracy(℃) | ±1 | ||||
| Furnace temperature uniformity(℃) | ±3 | ||||
| Maximum Vacuum Degree(Pa) | 6.7 * E -3 | ||||
| Pressure raise rate （Pa/H） | ≤ 0.5 | ||||
| Air cooling pressure | 2 | ||||
| Furnace structure | Horizontal, single chamber | ||||
| Furnace door opening method | Hinge type | ||||
| Heating elements | Ni Strip heating element | ||||
| Heating chamber | Metal Insulation screen | ||||
| PLC & Electric elements | Siemens | ||||
| Temperature controller | EUROTHERM | ||||
| Vacuum pump | Mechanical pump， roots pump，diffusion pump | ||||
| Customized optional ranges | |||||
| Furnace structure | Horizontal,Vertical, single chamber or multi chambers | ||||
| Door opening method | Hinge type, Lifting type,Flat type | ||||
| Heating elements | Ni Strip heating element， Mo heating elements | ||||
| PLC & Electric elements | Siemens;Omron;Mitsubishi;Siemens | ||||
| Temperature controller | EUROTHERM;SHIMADEN | ||||
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and excellent excellent management throughout all stages of creation enables us to guarantee total buyer satisfaction for Short Lead Time forHeat Treatment Cost- Low temperature vacuum brazing furance – Paijin , The product will supply to all over the world, such as: Jordan, Honduras, Tajikistan, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Helen from Slovenia - 2017.06.29 18:55
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Salome from Jersey - 2018.05.15 10:52
Write your message here and send it to us
-
Newly Arrival Vacuum High Pressure Gas Quenchin...
-
Factory Free sampleVacuum Heat Treatment- High...
-
Manufacturer of Graphite Insulation Felt- Low ...
-
High QualitySintering Process In Powder Metallu...
-
OEM Factory forEnvironmental Protection Vacuum ...
-
Factory OutletsVarious Types Of Plate Warping-...