PJ-VDB Vacuum diamond brazing furnace
1. When the diamond brazing vacuum furnace is brazed, the whole component is uniformly heated, the thermal stress is small, and the deformation amount can be controlled to a minimum limit, which is particularly suitable for brazing products.
2. The diamond brazing vacuum furnace does not use brazing flux, and there are no defects such as voids and inclusions, which can save the cleaning process of residual flux after brazing, save time, improve working conditions and environment.
3. A diamond brazed vacuum furnace can simultaneously braze muliple adiacent welds or braze muliple components in the same furnace High welding efficiency
4. The low pressure around the base metal and the brazing filer metal can eliminate volatile gases and impurities released at the brazing temperature, improve the properties of the base metal, and achieve very bright bonding.
Main specification
|
Model code |
Work zone dimension mm |
Load capacity kg |
Heating power kw |
|||
|
length |
width |
height |
||||
|
PJ-VDB |
644 |
600 |
400 |
400 |
200 |
100 |
|
PJ-VDB |
755 |
700 |
500 |
500 |
300 |
160 |
|
PJ-VDB |
966 |
900 |
600 |
600 |
500 |
200 |
|
PJ-VDB |
1077 |
1000 |
700 |
700 |
700 |
260 |
|
PJ-VDB |
1288 |
1200 |
800 |
800 |
1000 |
310 |
|
PJ-VDB |
1599 |
1500 |
900 |
900 |
1200 |
390 |
|
Max Work temperature:1300℃; Temperature uniformity:≤±5℃; Ultimate vacuum: 6.7*10-4 Pa; Pressure raise rate:≤0.2 Pa/h; Gas cooling pressure:<2 Bar.
|
||||||
Note: Customized dimension and specification available
